Cincinnati Machine G Codes List | Cincinnati Machine Programming Online Free Traning

Cincinnati Machine G Codes List:-

G00            =       Rapid Traverse (Linear)

G01            =       Linear Interpolation

G02            =       Circular Interpolation CW

G03            =       Circular Interpolation CCW

G04            =       Dwell

G09            =       Exact Stop

G12            =       Contouring Rotary Axis Unwind

G15.1         =       Polar Coordinate Programming (Blot Circle)

G15.2         =       Polar Coordinate Programming (Part Contour)

G150          =       Scaling Off

G151          =       Scaling On

G152          =       Position Towed Tailstock

G18            =       ZX Plane Select

G20            =       Straight or Taper Turning Cycle

G21            =       Straight or Taper Facing Cycle

G28            =       Auto Return to Reference Point

G29            =       Auto Return from Reference Point

G32            =       Threads per Inch Threading

G33            =       Threading Constant & Variable Lead

G34            =       Auto Multiple Pass Threading Cycle

G35            =       OD/ID Groove Cycle

G35.1         =       Face Groove Cycle

G36            =       Move To Next Operation Location

G36.1         =       Check End of Pattern

G40            =       Tool Nose Radius Compensation OFF

G41            =       Tool Nose Radius Compensation on LEFT

G42            =       Tool Nose Radius Compensation on RIGHT

G45            =       Acceleration/Deceleration ON

G46            =       Acceleration /Deceleration OFF

G52            =       Local Coordinate System

G60            =       Positioning Mode

G61            =       Contouring Mode

G62            =       Diameter Programming Mode

G63            =       Radius Programming Mode

G70            =       Inch Programming

G71            =       Metric Programming

G72            =       Stock Removal Finish Cycle

G73            =       Stock Removal Turning Cycle

G74            =       Stock Removal Facing Cycle

G75            =       Stock Removal Copy Cycle

G80            =       Reset Fixed Cycle

G81            =       Drill Cycle

G82            =       Counter Bore/ Spot Drill With Dwell Cycle.

G83            =       Deep Hole Drill (Peck Drill) Cycle

G84            =       Tap Cycle (Conventional)

G84.1         =       Rigid Tap Cycle

G85            =       Bore/Ream Cycle

G86            =       Bore Cycle

G87            =       Back Bore Cycle

G88            =       Web Drill / Bore Cycle

G89            =       Bore / Ream With Dwell Cycle

G90            =       Absolute Dimension Input

G91            =       Incremental Dimension Input

G92            =       Position Set

G92.1         =       Position Sets Setup Offset

G93            =       Inverse Time Federate

G94            =       Feed Per Minute Federate Mode

G95            =       Feed Per Revolution Federate Mode

G96            =       Constant Surface Speed

G97            =       Constant Spindle Speed Cancel(S=Rpm)

G98            =       Machine Coordinates (Tool Tip)

G98.1         =       Machine Coordinates

G99            =       Position Set Cancel

Read more »

Hass machine G Code List

Haas G Code list:-

G00 RAPID POSITIONING MOTION (X,Z,U,W,B) (SETTING 10, 101)

G01 LINEAR INTERPOLATION MOTION (X,Z,U,W,B,F)

G01 CHAMFERING AND CORNER ROUNDING (X,Z,U,W,B,I,K,R,A,F)

G02 CW CIRCULAR INTERPOLATION MOTION (X,Z,U,W,I,K,R,F)

G03 CCW CIRCULAR INTERPOLATION MOTION (X,Z,U,W,I,K,R,F)

G04 DWELL (P) (P=seconds...milliseconds)

G05 FINE SPINDLE CONTROL MOTION (X,Z,U,W,R,F) (LIVE TOOLING)

G09 EXACT STOP, NON-MODAL

G10 PROGRAMMABLE OFFSET SETTING (X,Z,U,W,L,P,Q,R)

G14 MAIN-SPINDLE SHIFT TO SUB-SPINDLE

G15 MAIN-SPINDLE SHIFT TO SUB-SPINDLE CANCEL

G17 CIRCULAR MOTION XY PLANE SELECTION (G02,G03) (LIVE TOOLING)

G18 CIRCULAR MOTION ZX PLANE SELECTION (G02,G03) (SETTING 56)

G19 CIRCULAR MOTION YZ PLANE SELECTION (G02,G03) (LIVE TOOLING)

G20 VERIFY INCH COORDINATE POSITIONING (SETTING 9 needs to be INCH)

G21 VERIFY METRIC COORDINATE POSITIONING (SETTING 9 needs to be METRIC)

G28 MACHINE ZERO RETURN THRU REF. POINT (X,Z,U,W,B) (Fanuc)

G29 MOVE TO LOCATION THROUGH G29 REF. POINT (X,Z) (Fanuc)

G31 FEED UNTIL SKIP FUNCTION (X,Z,U,W,F)

G32 THREAD CUTTING PATH, MODAL (X,Z,U,W,F)

G40 TOOL NOSE COMPENSATION CANCEL G41/G42 (X,Z,U,W,I,K) (SETTING 56)

G41 TOOL NOSE COMPENSATION, LEFT (X,Z,U,W) (SETTING 43, 44, 58)

G42 TOOL NOSE COMPENSATION, RIGHT (X,Z,U,W) (SETTING 43, 44, 58)

G50 SPINDLE SPEED MAXIMUM RPM LIMIT (S)

G51 RETURN TO MACHINE ZERO, CANCEL OFFSET (Yasnac)

G52 WORK OFFSET COORDINATE POSITIONING (Yasnac)

G52 GLOBAL WORK COORDINATE SYSTEM SHIFT (Fanuc)

G53 MACHINE COORDINATE POSITIONING, NON-MODAL (X,Z,B)

G54 WORK OFFSET COORDINATE POSITIONING #1 (SETTING 56)

G55 WORK OFFSET COORDINATE POSITIONING #2

G56 WORK OFFSET COORDINATE POSITIONING #3

G57 WORK OFFSET COORDINATE POSITIONING #4

G58 WORK OFFSET COORDINATE POSITIONING #5

G59 WORK OFFSET COORDINATE POSITIONING #6

G61 EXACT STOP, MODAL (X,Z)

G64 EXACT STOP G61 CANCEL (SETTING 56)

G65 MACRO SUB-ROUTINE CALL

G70 FINISHING CYCLE (P,Q)

G71 O.D. / I.D. STOCK REMOVAL CYCLE (P,Q,U,W,I,K,D,S,T,R1,F) (SETTING 72, 73)

G72 END FACE STOCK REMOVAL CYCLE (P,Q,U,W,I,K,D,S,T,R1,F) (SETTING 72, 73)

G73 IRREGULAR PATH STOCK REMOVAL CYCLE (P,Q,U,W,I,K,D,S,T,F)

G74 FACE GROOVING, or HIGH SPEED PECK DRILL CYCLE (X,Z,U,W,I,K,D,F) (SETTING 22)

G75 O.D. / I.D. PECK GROOVING CYCLE, (X,Z,U,W,I,K,D,F) (SETTING 22)

G76 THREAD CUTTING CYCLE, MULTIPLE PASS (X,Z,U,W,I,K,A,D,F) (SETTING 86, 95, 96, 99)

G77 FLATTING CYCLE (I,J,L,R,S,K) (LIVE TOOLING)

G80 CANCEL CANNED CYCLE (SETTING 56)

G81 DRILL CANNED CYCLE (X,Z,W,R,F)

G82 SPOT DRILL / COUNTERBORE CANNED CYCLE (X,Z,W,P,R,F)

G83 PECK DRILLING CANNED CYCLE (X,Z,W,I,J,K,Q,P,R,F) (SETTING 22, 52)

G84 TAPPING CANNED CYCLE (X,Z,W,R,F)

G85 BORE IN, BORE OUT CANNED CYCLE (X,Z,U,W,R,L,F)

G86 BORE IN, STOP, RAPID OUT CANNED CYCLE (X,Z,U,W,R,L,F)

G87 BORE IN, STOP, MANUAL RETRACT CANNED CYCLE (X,Z,U,W,R,L,F)

G88 BORE IN, DWELL, MANUAL RETRACT CANNED CYCLE (X,Z,U,W,P,R,L,F)

G89 BORE IN, DWELL, BORE OUT CANNED CYCLE (X,Z,U,W,P,R,L,F)

G90 O.D. / I.D. TURNING CYCLE, MODAL (X,Z,U,W,I,F)

G92 THREADING CYCLE, MODAL (X,Z,U,W,I,F) (SETTING 95, 96)

G94 END FACING CYCLE, MODAL (X,Z,U,W,K,F)

G95 END FACE LIVE TOOLING RIGID TAP (X,Z,W,R,F)

G96 CONSTANT SURFACE SPEED, CSS ON (S)

G97 CONSTANT NON-VARYING SPINDLE SPEED, CSS OFF (S) (SETTING 56)

G98 FEED PER MINUTE (F)

G99 FEED PER REVOLUTION (F) (SETTING 56)

G100 MIRROR IMAGE CANCEL G101

G101 MIRROR IMAGE (X,Z) (SETTING 45, 47)

G102 PROGRAMMABLE OUTPUT TO RS-232 (X,Z)

G103 LIMIT BLOCK LOOKAHEAD (P0 - P15 max. for number control looks ahead)

G105 SERVO BAR COMMAND

G110-G111 WORK OFFSET COORDINATE POSITIONING #7- #8

G112 CARTESIAN TO POLAR TRANSFORMATION

G113 CARTESIAN TO POLAR TRANSFORMATION CANCEL

G114-G129 WORK OFFSET COORDINATE POSITIONING #9 - #24

G159 BACKGROUND PICKUP / PART RETURN

G160 APL AXIS COMMAND MODE ON

G161 APL AXIS COMMAND MODE OFF

G184 REVERSE TAPPING CANNED CYCLE (X,Z,W,R,F) (SETTING 130)

G187 ACCURACY CONTROL FOR HIGH SPEED MACHINING (E) (SETTING 85)

G194 SUB-SPINDLE / TAPPING CANNED CYCLE

G195 LIVE TOOLING VECTOR TAPPING (X,F)

G196 LIVE TOOLING VECTOR TAPPING REVERSE (X,F)

G200 INDEX ON THE FLY (X,Z,U,W,T)

Read more »

Multiple Thread Cutting Cycle G76

Multiple Thread Cutting Cycle G76:-

G76P (m) (r) (a) Q (Δd min) R (d);

G76X (u) _ Z(W) _ R(i) P(k) Q(?d) F(L) ;

m                =        Repetitive Count In Finishing (1 To 99)

r                  =        Chamfering Amount

a                  =        Angle of Tool Tip

P                  =        m, r, and a are specified by address P at the same time.

Δdmin          =        Minimum Cutting Depth (Specified By the Radius Value)

d                 =        Finishing Allowance

I                  =        Difference Of Thread Radius If I = 0, Ordinary Straight       Thread Cutting Can Be Made.

K                 =        Height of Thread

Δd                =        Depth of Cut in 1st Cut (Radius Value)

L                 =        Lead Of Thread (Same as G32).

Example:-

Notes:-

1.   In the blocks where the multiple repetitive cycle are commanded, the addresses P, Q, X, Z, U, W, and R should be specified correctly for each block.

2.    In the blocks in which G70, G71, G72, or G73 are commanded and between the sequence number specified by P and Q, M98 (subprogram call) and M99 (subprogram end) cannot be commanded.

3.   In the blocks between the sequence number specified by P and Q, the following commands cannot be specified.

One shot G code except for G04 (dwell)

01 group G code except for G00, G01, G02, and G03

06 group G code

M98 / M99

4.    When G70, G71, G72, or G73 is executed, the sequence number specified by address P and Q should not be specified twice or more in the same program.

5.    The blocks between the sequence number specified by P and Q on the multiple repetitive cycle must not be programmed by using “Direct Drawing Dimensions Programming”.

6.   The multiple repetitive cycle cannot be executing during DNC operation.

7.   Interruption type custom macro cannot be executed during executing the multiple repetitive cycle.

Alarm:-

1.   In the block which is specified by address P of G71, G72 or G73, G00 or G01 group should be commended. If it is not commanded, P/S alarm No.65 is generated.

2.   In MDI mode, G70, G71, G72, or G73 cannot be commanded. If it is commanded, P/S alarm No. 67 is generated. G74, G75, and G76 can be commanded in MDI mode.

Read more »