Cincinnati Machine M Codes List:-
M00 = Program Stop
M01 = Optional Stop
M02 = End Of Program (Do Not Put Tool Away)
M03 = Spindle on CW
M04 = Spindle on CWW
M05 = Spindle Stop
M06 = Tool Change, Not Retracted, Shortest Path
M06.1 = Tool Change, With Retract
M06.2 = Tool Change, No Retract, Increasing Tool Numbers
M06.3 = Tool Change, No Retract, Decreasing Tool Numbers
M08 = Coolant #1 ON
M09 = Coolant OFF
M13 = Spindle On CW, Coolant #1 On
M14 = Spindle On CCW, Coolant #1 On
M19 = Oriented Spindle Stop
M30 = End Of Program
M34 = Enable Data Acquisition
M35 = Disable Data Acquisition
M48 = Feedrate & Spindle Speed Override Enable
M49 = Feedrate & Spindle Speed Override Disable
M60 = Chip Conveyor On
M61 = Chip Conveyor Off
M62 = Barfeeder Enable
M63 = Barfeeder Disable
M80 = Release Chuck Jaws
M81 = Grip Chuck Jaws
M80.1 = OD Work Holding Releases Part, ID Grips Part
M81.1 = OD Work Holding Grips Part, ID Releases Part
M82 = Advance Part Catcher
M83 = Retract Part Catcher
M86 = Advance Tailstock Quill
M87 = Retract Tailstock Quill
Post a Comment