G00 Rapid traverse

G00 Rapid traverse:-

The G00 command moves a tool to the position in the workpiece system specified with an absolute or an incremental command at a rapid traverse rate. In  the  absolute  command,  coordinate  value  of  the  end  point  is  programmed.

In the incremental command the distance the tool moves is programmed.

Nonlinear interpolation positioning

The tool is positioned with the rapid traverse rate for each axis separately.  The tool path is normally straight.

                                      

Example:-

                   G00 X5.00 Z5.00;

                   Or

                   G00 X250.0 Z250.0