Automatic rounding Okuma Control G76

G76  Automatic rounding

          Corners of work can be rounded using a simple program.

         

[Command format]

          G76 G01 X_ L_ F_

                  Z_

          X and Z: Instruct target points for axis movement.

          L: Instruct a (+) or (-) signed rounding distance when the direction of axis movement in the next block is positive or negative direction, respectively.

[Note]

          1. G75 is valid only in the G01 mode.

          2. The rounding program is effective also in combination with   LAP instruction or during nose radius compensation.