G02 Circular interpolation
(CW)
It Moves from the
current position to the target position at the instructed radius and feedrate
in circular path.
[Command
format]
G02 X___ Z___ (I___ K___) F___
(L___ )
G02 X___ Y___ (I___ J___) F___ (Y-axis control)
(L___ )
G02 Y___ Z___ (J___ K___) F___ (Y-axis control)
(L___ )
I:
Signed distance from the starting point to center of circle in the X-axis
direction.
K:
Signed distance from the starting point to center of circle in the Z-axis
direction.
J:
Signed distance from the starting point to center of circle in the Y-axis
direction.
L:
Radius of circular path
F:
Feedrate
[Note]
1. I and K commands instruct the
radius.
2. While two arcs can be obtained from
the L command, the 180 or less arc is selected.
To select an arc having more than 180, instruct CALRG at the same time
3. The Y axis control is the special
specification.
Post a Comment