Fixed thread cutting cycle End face G32

G32 Fixed thread cutting cycle: End face

        

[Command format]

          G32 X__ Z__ K__ (E__) (I__) (L__) F__ (C__)

          X: Coordinates of ending point of end face thread cutting

          Z: Thread cutting dimension for each thread cutting

          F: Thread pitch instruction (F/J pitch if J is instructed)

          K: Difference between start and end points for taper thread cutting (If not instructed, K=1.)

             When the value is plus, upward taper, while downward taper then it is a minus value.

          A: Taper angle from the axis parallel to Z axis   (Instruct K or A only.)

          E: Pitch change per pitch for variable pitch thread cutting    (If not instructed, E=0.)

          I: X-axis shift distance at thread cutting start point    (If not instructed, I=0.)

          L: Thread overcutting distance (If not instructed, L is equal to one pitch at start of thread cutting.)

             This is valid when thread cutting chamfering M code (M23) is instructed.

          J: Number of threads at the distance instructed by F (If not instructed, J=1.)

          C: Phase difference of thread cutting (If not instructed, C=0.)