G73 Longitudinal grooving compound
fixed cycle
[Command format]
G73 X_ Z_ I_ K_ D_ L_ F_ E_ T_
X: X coordinates of target point
Z: Z coordinates of target point
I: Shift distance in X-axis
direction (Diameter instruction. If the instruction is not instructed, it is
regarded as 0.)
K: Shift distance in Z-axis
direction (If not instructed, it is regarded as 0.)
D: Cut depth
L: Cut depth at removing the tool (Diameter instruction) (If not instructed, this sequence will not
be executed.)
DA: Instruct a return distance. If DA is not instructed, it is regarded as the return distance set to
that of the grooving, drill cycle (other
function 1) of the optional parameter.
E: Dwell upon arrival at Z-axis target
point (The unit of instruction is the same as G04.) (If not instructed, this sequence will not be
executed.)
T: Tool compensation No. instruction
which determines the tool compensation amount at Z-axis target point positioning
(if not instructed, the T instruction at the start point positioning is
used. The T instruction next to this
block, or the compensation number, acts as the T instruction at start point positioning.)
Post a Comment