G75 Automatic chamfering Okuma Control

G75 Automatic chamfering

        

          Corners of work can be chamfered using a simple program.

        

[Command format]

         G75 G01 X_ L_ F_

                  Z_

          X and Z: Instruct target points for axis movement.

          L: Instruct a (+) or (-) signed chamfering distance when the direction of axis movement in the next block is positive or negative direction, respectively.

[Note]

         1. G75 is valid only in the G01 mode.

          2. The chamfering program is effective also in combination  with LAP instruction or during nose radius compensation.